| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Fox florentine jig http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=8995 |
Page 1 of 1 |
| Author: | Mark Hanna [ Tue Oct 24, 2006 11:54 pm ] |
| Post subject: | |
I don't know if anyone else has made this jig, but it works great! It's a mold that goes into the fox bender. I remove the 2 outer bulbs leaving just the middle one, and also use a blanket. I turn the blanket off after the press is completely down. Makes a perfect cutaway bend every time! 
|
|
| Author: | Serge Poirier [ Tue Oct 24, 2006 11:58 pm ] |
| Post subject: | |
Great jig, i think i saw something similar on Dave Painter's website, i'll probably build one like this one soon, thanks for sharing Mark! |
|
| Author: | Dave Rector [ Wed Oct 25, 2006 2:33 am ] |
| Post subject: | |
That's pretty cool Mark! I was pondering the best way to bend one of those just the other day. Thanks! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|